Results 1 to 4 of 4

Thread: Rear sway bar measurements

  1. #1
    Join Date
    Jun 2012
    Location
    New Orleans
    Posts
    248

    Rear sway bar measurements

    Guys I need help. I have my suspension apart and I need to drill my lower rear control arms for the sway bar bracket. If someone can send me the measurement or diagram I would really appreciate it. I have heard it should have dimples, but I don't see any. I am trying to get it together tomorrow. My car is a 73 cutlass supreme.

  2. #2
    Join Date
    Aug 2009
    Location
    Bradenton, FL/Rockford, IL
    Posts
    458
    Click on "instructions". 10 inches from the center of the bushing and then 5 inches back from that hole is what I do, but I box mine and put a sleeve through the bolt hole so it doesn't stress the arm vertically....

    http://www.summitracing.com/parts/su...a/instructions

  3. #3
    Join Date
    Aug 2009
    Location
    Bradenton, FL/Rockford, IL
    Posts
    458
    Click on "instructions". 10 inches from the center of the bushing and then 5 inches back from that hole is what I do, but I box mine and put a sleeve through the bolt hole so it doesn't stress the arm vertically....

    http://www.summitracing.com/parts/su...a/instructions

  4. #4
    This looks like a simple enough install. The instructions say to loosen the rear shocks. Did anyone do that step?
    Blessed..
    1976 Oldsmobile Cutlass Supreme
    1975 Chevrolet Monte Carlo
    1967 Buick LeSabre
    1999 Toyota Camry
    2008 Toyota Tundra

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •