Info Wanted

[Andy 73]

Anyone know where I can find the rubber strip that runs across the front of the bumper of a 75 Cutlass CEC

[73hurst]

Andy,

No one is reproducing those at this time. Your best solution would be to find an NOS example or good used one. With that said, Gary and I have been working with an OCA member to get the '73 and '74 bumper rub strips reproduced. I don't know if '74 and '75 are the same. He's done some for the Buick guys and full sized, so we're hoping this will be successful. We'll post the information on the board if and when it all turns out. Keep your fingers crossed.

Pete

[73431Cutlass]

Lets hops so! I am in dire need of new ones for some freshly chromed bumpers! Keep up the good work!

[RocketMan]

I'm in for 3 !!! :D

[zodiacblue442]

Andy, As Pete said, he and I are working with another OCA member to reproduce the front and rear impact strips for `73 Cutlass S (442 and H/O). I'm also in preliminary discussions with him in reproducing the `74 and `75 Cutlass strips. I've got a `74 Supreme and a `75 Supreme. The strips for the front bumper look nearly identical but there are different part numbers for them so I don't know what the difference is. The rear bumper is the same. If he goes to all the time and work to make the `74 -`75 strips, he would want to make the front one so it will work on both cars.

Hopefully Pete and I will be able to write some good news in a few months!


Andy,

No one is reproducing those at this time. Your best solution would be to find an NOS example or good used one. With that said, Gary and I have been working with an OCA member to get the '73 and '74 bumper rub strips reproduced. I don't know if '74 and '75 are the same. He's done some for the Buick guys and full sized, so we're hoping this will be successful. We'll post the information on the board if and when it all turns out. Keep your fingers crossed.

Pete

[76HOProposal]

erased