200 4r carb setup

[keith455]

This is what the TV cable setup looks like on my H/O right now.. is there anything that I can buy to fix the rigging that i did with the piece of metal?

[sledhead2]

I would get a late 70's Q jet and measure from the center point of the pivot to the throttle cable connection and to the tv cable connection. then i would compair the measurments on your set up.

If your tv is not set right you will cook your trans

[ragz442]

This thread may help, I've said it before, but if you need tech help, alot of these guys know their shizit.

http://72.22.90.30/phpBB2/viewtopic.php?t=33775&sid=031c5197063ed52a12844bd9f76a0918

[keith455]

Yeah i've been to the 72.22.90.30 site before when i was first trying to figure this out. I only found info about 72 and older and then 78 up. What i need is the little ball piece that goes on the carb so the cable can clip onto it. guess i'll hit the junk yard.

[psquare75]

Car Craft just showed how to fix this with a 700... I assume a 200 is the same.. They have a spring loaded cable that moves sorta indepedent of throttle rotation.

[73CS]

Kieth, check out the bowtie overdrives at www.bowtieoverdrives.com look under the TV systems, they should have something to help.