EGR question

[John inNH]

My '75 Salon has a stuck EGR valve, resulting in some stalling and hesitation when cold. A new one will run around $70.00. What would happen if I were to install an EGR block off plate? Will it cause any problems, or just affect the emissions?

John

[stews73ho]

I blocked off the egr on my 73 HO. These are prone to failure and like you I did not want to spend the money. I asked around and others have done it. I have not had any problems. Lets see what others have to say.

Eric

[stews73ho]

I think we would be money and performance ahead to install a edelbrock intake.

Eric

[ragz442]

You can just disconnect it and plug off the vacuum line until you figure out what your going to do.

[John inNH]

Tried the disconnect idea already, it seems to be jammed in the open position. And I do want to get an Edelbrock Performer RPM eventually, but not right now, #1 son has a college tuition payment this month (or rather I have a payment, he has the college).

John

[stews73ho]

I cut mine out of 1/4 plate with a saws-all and 4 1/2" grinder. Cost $0. Eventually I will install a performer also.