Picture's of parts for sale

[442MUCH]

Selling some of my collected parts. See if there is anything that interestes you and let me know. Also have a complete roof with glass Hurst/Hatches and weatherstripping for anyone interested in turning their 442/Cutlass into a T-Top car. Roof headliner is saddle (light gold)colour.

http://img.photobucket.com/albums/v417/vttedrm/DSC_1878.jpg
http://img.photobucket.com/albums/v417/vttedrm/DSC_1879.jpg
http://img.photobucket.com/albums/v417/vttedrm/DSC_1855.jpg

Have some close up pix of the parts here. Trunk lid (76-77) not shown. Also
have back glass with defroster. Hood was bought for the louvers. Sold the 77 so don't need it now.

http://img.photobucket.com/albums/v417/vttedrm/DSC_1873.jpg

[442MUCH]

Seats are for the frame or a re-upholstery job. Theyare sitting on swivel bases.

http://img.photobucket.com/albums/v417/vttedrm/DSC_1875.jpg
http://img.photobucket.com/albums/v417/vttedrm/DSC_1863.jpg

[ragz442]

Ken, are those the stainless S quarter window trim? Are you missing a section? If so, let me know which side. I may have the piece your missing, I ended up with an extra top section. Nice selection of parts you have there.

Those white interior pieces should sell quick, those are hard to come by.

[W451973]

Ken. What the heck is that big round thing on the upper right just under the lower door panels ?

[442MUCH]

Ken. What the heck is that big round thing on the upper right just under the lower door panels ?

That my man, is a fire pit! Albeit an Oldsmobile fire pit. And NO! It's not for sale. :D

[442MUCH]

Ken, are those the stainless S quarter window trim? Are you missing a section? If so, let me know which side. I may have the piece your missing, I ended up with an extra top section. Nice selection of parts you have there.

Those white interior pieces should sell quick, those are hard to come by.

Yes, the stainless quarter window trim. I think I have the other piece, I just have to do a little digging. Picked them up a couple of years ago, so it must be around. Don't know what side it's for...yet.:)

[sledhead2]

Ken can you tell me about the rear bumper rub strip? is it in great shape? how did you get it? how much you want for it.

Also the wheel well molding what is the condition? how much?

[442MUCH]

Ken can you tell me about the rear bumper rub strip? is it in great shape? how did you get it? how much you want for it.

Also the wheel well molding what is the condition? how much?

The bumper strip is in great shape. Has all the connection tabs. I got it from a guy in our car club who use to collect car parts for 76/77 Cutlasses. Actually he just sold his car. It was the blue Cutlass Supreme that I posted her last month. I would have bought it myself but I have 4 cars already and a 2 car garage.:rolleyes:


The wheel well mouldings are in good shape but there are a few dings - they are not perfect, but they are in decent shape. I was keeping them for spares for my car.

All these parts were spares for my 442 and the 77 442 that I had before the Vette.

Rear Bumper Moulding: $40 + shipping
2 Wheel Well Mouldings: $40 + shipping

Bumper & wheel mouldings $75 + shipping

[442MUCH]

Few more shots

http://img.photobucket.com/albums/v417/vttedrm/DSC_1859.jpg
http://img.photobucket.com/albums/v417/vttedrm/DSC_1860.jpg
http://img.photobucket.com/albums/v417/vttedrm/DSC_1856.jpg
http://img.photobucket.com/albums/v417/vttedrm/DSC_1858-1.jpgIMG]

[442MUCH]

http://img.photobucket.com/albums/v417/vttedrm/DSC_1876.jpg
http://img.photobucket.com/albums/v417/vttedrm/DSC_1861.jpg
http://img.photobucket.com/albums/v417/vttedrm/DSC_1868.jpg
http://img.photobucket.com/albums/v417/vttedrm/DSC_1866.jpg

[Ktaaffe77442]

Hey ken this is my first post and my first visit. I am in the final stages of fixing my 1977 442 and I have been searching for a Header emblem for my car I see there is one in realitively good shape in your pics. would you be willing to sell it? I also am looking for stainless 1/4 window moldings my plastic ones were trashed. p.s. your 76 looks sweet i hope to have pics of mine posted soon.

[psquare75]

Hey, out of all those white sunvisors, do you have a really nice pair driver and passenger? How much would you want?

Also

The lower door panels, are they actually white or were they dyed.. and are they flaky at all/broken? I could change the carpet and use them in my H/O.

Whatcha looking to get for those?

http://www.73-77olds.com/forums/showthread.php?t=173

Got any of those? :o

[W451973]

Firepit ! DUH, I knew that. I was just testing yuh. Yea yea, thats the ticket. :)

[brad442]

Ken, I would be interested in the buckskin bucket seat backs if they are in good shape, the rear console lens, maybe a set of side mirrors and the reverse back up lights.

[mich77442]

Ken how much for the center rear counsel light and do you have the all the wires for it?

Denny

[ThePunisher]

I'll take the window trim (the triangle shaped ones) if your price is somewhat reasonable and if you have the missing piece. Please let me know!!! I am so excited!! I'll send you a PM as well...

[ragz442]

Hey ken this is my first post and my first visit. I am in the final stages of fixing my 1977 442 and I have been searching for a Header emblem for my car I see there is one in realitively good shape in your pics. would you be willing to sell it? I also am looking for stainless 1/4 window moldings my plastic ones were trashed. p.s. your 76 looks sweet i hope to have pics of mine posted soon.

This appears to be the same header emblem that my '76 442 H/O has on it. I know it isn't diamond shaped but it does fit and looks good. Found on ebay, not my auction:


http://cgi.ebay.com/ebaymotors/1976-OLDSMOBILE-CUTLASS-NOS-FRONT-EMBLEM-AG-37_W0QQitemZ170115633614QQihZ007QQcategoryZ80736QQ rdZ1QQcmdZViewItem


Here's what it looks like on the car:
http://memimage.cardomain.net/member_images/12/web/684000-684999/684771_98_full.jpg

Here's the one you normally find on these cars:
http://memimage.cardomain.net/member_images/12/web/684000-684999/684771_82_full.jpg

[sledhead2]

Ken I pm'd you on parts

[PSU442]

hmmm.. seeing all those radio panels makes me think it's time to swap back in my old AM/FM radio. I knew I'd regret putting in a cd player. hmmm...

[mich77442]

Ken I pm'd you on some parts

Thanks
Denny

[442MUCH]

Hey, out of all those white sunvisors, do you have a really nice pair driver and passenger? How much would you want?

Also

The lower door panels, are they actually white or were they dyed.. and are they flaky at all/broken? I could change the carpet and use them in my H/O.

Whatcha looking to get for those?

http://www.73-77olds.com/forums/showthread.php?t=173

Got any of those? :o

Sunvisors: With or without the vanity mirror?
Lower panels: Not dyed (originally white) - not flakey. Very good shape

[442MUCH]

What I'm going to do is check back to see what people are interested in on Friday. Saturday I will take close up shots of the individual pieces that people have shown interest in and post the pictures and price for each. Shipping will be extra.

This way I can answer all of you at once.

Ken

[psquare75]

With a mirror preferably, but doesn't really matter.

[442MUCH]

hmmm.. seeing all those radio panels makes me think it's time to swap back in my old AM/FM radio. I knew I'd regret putting in a cd player. hmmm...

Chris,

My AM/FM/MP3 player is in the glove compartment. I left the dash looking original.

http://img.photobucket.com/albums/v417/vttedrm/Image082-1.jpg

[PSU442]

OT -- how did you mount that fire extinguisher? I should get one of those...

[mich77442]

Ken I need the black flexible trim that your shifter moves on a center counsel car. Do you have a good piece.

Denny

[kgl271]

Ken, how much do you want for the Shift Knob?

[74Olds]

May be a silly question, but I don't know... The swivel bases, do they require a "special" seat, or will any seat hook up to them? I'm just thinking of the new car I obtained, and would love to have swivel seats, the seats do have the Cutlass embroidery, and seem original to the car, if this helps...

Thanks,

[psquare75]

Did you get those pics? :-)

[442MUCH]

Did you get those pics? :-)

OK. I got them. Sorry for the delay. When you have two younger boys you sometimes miss deadlines.
OK Here is the pictures of the items that people were interested in.

Rear bumper strip

http://img.photobucket.com/albums/v417/vttedrm/parts/DSC_1935.jpg
http://img.photobucket.com/albums/v417/vttedrm/parts/DSC_1937.jpg
http://img.photobucket.com/albums/v417/vttedrm/parts/DSC_1939.jpg
http://img.photobucket.com/albums/v417/vttedrm/parts/DSC_1941.jpg

[442MUCH]

Wheel Well mouldings

http://img.photobucket.com/albums/v417/vttedrm/parts/DSC_1944.jpg
http://img.photobucket.com/albums/v417/vttedrm/parts/DSC_1949.jpg
http://img.photobucket.com/albums/v417/vttedrm/parts/DSC_1950.jpg

[442MUCH]

Shifter Knob $15 + S/H

http://img.photobucket.com/albums/v417/vttedrm/parts/DSC_1955.jpg

Back up lights (pair) $30 + S/H

http://img.photobucket.com/albums/v417/vttedrm/parts/DSC_1963.jpg
http://img.photobucket.com/albums/v417/vttedrm/parts/DSC_1980.jpg

Mirrors $50 (pair) + S/H

http://img.photobucket.com/albums/v417/vttedrm/parts/DSC_1971.jpg

[442MUCH]

Lower Door panels (original white) No flaking or crumbling $100 pr + S/H

http://img.photobucket.com/albums/v417/vttedrm/parts/DSC_1933.jpg
http://img.photobucket.com/albums/v417/vttedrm/parts/DSC_1929.jpg
http://img.photobucket.com/albums/v417/vttedrm/parts/DSC_1928.jpg
http://img.photobucket.com/albums/v417/vttedrm/parts/DSC_1926.jpg

[442MUCH]

Air Cleaner Lid $40 + S/H

http://img.photobucket.com/albums/v417/vttedrm/parts/DSC_1921-1.jpg
http://img.photobucket.com/albums/v417/vttedrm/parts/DSC_1952.jpg

Quarter Window Trim - Can't find the last piece (sorry)
Seat Backs (sold)
Console Lens (sold)

120 MPH Speedometer $50 + S/H

http://img.photobucket.com/albums/v417/vttedrm/parts/DSC_1979.jpg

Shifter Slider $25 + S/H

http://img.photobucket.com/albums/v417/vttedrm/parts/DSC_1974.jpg

[442MUCH]

1976 Grilles $50 + S/H
Chrome Wheel Caps - Set of 4 $75 + S/H
Trunk Emblem $15 + S/H

http://img.photobucket.com/albums/v417/vttedrm/parts/DSC_1974.jpg

[442MUCH]

Sunvisor (original white - no mirror) $40 (pair) + S/H

http://img.photobucket.com/albums/v417/vttedrm/parts/DSC_1919.jpg
http://img.photobucket.com/albums/v417/vttedrm/parts/DSC_1918.jpg
http://img.photobucket.com/albums/v417/vttedrm/parts/DSC_1917.jpg
http://img.photobucket.com/albums/v417/vttedrm/parts/DSC_1916.jpg

[442MUCH]

OT -- how did you mount that fire extinguisher? I should get one of those...

Four screws into the console. You'll notice I have an extra console:D

[442MUCH]

May be a silly question, but I don't know... The swivel bases, do they require a "special" seat, or will any seat hook up to them? I'm just thinking of the new car I obtained, and would love to have swivel seats, the seats do have the Cutlass embroidery, and seem original to the car, if this helps...

Thanks,

The swivels require the special high back bucket seat. If you don''t have the swivel buckets, the base will be useless.

[kgl271]

Do you accept Paypal or do you want a check?

I will take the Shift Knob.

[442MUCH]

Do you accept Paypal or do you want a check?

I will take the Shift Knob.

I've never used paypal. A cheque or money order is OK. Shipping shouldn't be that much for a shifter. I'll see what Greyhound says. I have to figure out shipping for other things anyway.

Ken

[ragz442]

Quarter Window Trim - Can't find the last piece (sorry)
Ken, from your first pics, it looks like your missing the passenger top section. If so, that's the one I have. As hard as these are to come by, we should make a complete set. LMK

[sumrof75]

could you figure shipping to 66025 for the door panels? May be interested. thanks Tony

[442MUCH]

Ken, from your first pics, it looks like your missing the passenger top section. If so, that's the one I have. As hard as these are to come by, we should make a complete set. LMK

PM sent.

[mich77442]

I'll take the shifter slider. Give me your address and I'll send you a check.

Thanks alot
Denny Harris

[texxas8902]

I just noticed in the first post on this thread you mention a saddle headliner. Is it for the t top roof? Any pictures? Is it in good shape? Do you want to sell it separately from the t top roof? Same questions for the top weatherstrip and interior plastic trim pieces that fit on the tops.
Thanks

[442MUCH]

I just noticed in the first post on this thread you mention a saddle headliner. Is it for the t top roof? Any pictures? Is it in good shape? Do you want to sell it separately from the t top roof? Same questions for the top weatherstrip and interior plastic trim pieces that fit on the tops.
Thanks

Actually the correct colour is buckskin. It's for the T tops in the first picture and it's attached. The t-tops, weatherstrip and complete roof all go as a package. Attached to the roof are sunvisors and a combination map and dome reading lamps.

[kgl271]

Ken I sent you a pm about the part I was looking for.

[caprince]

What's the condition of the Gauge cluster and what's your asking price

[442MUCH]

What's the condition of the Gauge cluster and what's your asking price

The one I have is in excellent condition. However it is a spare for my car. So, it's not worth what I'd ask for it. I'm like a smoker with one cigarette left. I could probably go for days without one, but if I didn't have one, I'd need one. So, with that said, here is a nice one that you can get for a reasonable price. I'm not trying to screw anyone so I did a search for you.

Good luck

http://cgi.ebay.com/ebaymotors/1975-75-76-77-olds-cutlass-gauges_W0QQitemZ250148203489QQcmdZViewItem?hash=it em250148203489

[caprince]

Can I see a better picture of the grills

[allpro1975]

I'm in need of 77 header assy w/grilles. Do you have any better pics of yours and how much ? (with shipping to Texas)

[442MUCH]

I'll see what I can do about a better picture.

[RocketRuss]

Hi Ken, Hey do you still have the t-tops? How much are you asking for them and I don't know how you would ship it. I'm in Ravenna,Ohio 44266 If you get the chance to look into it and get back with me.....NO RUSH. It's something I want to do I have so many other projects as well. Thanks, Russ

[bayouh/o]

Ken, do you have any of the white visors w/ mirrors, or the '75 owner's manual package left? If so, please let me know. Thanks.

[allpro1975]

I was also wondering about the T-tops though shipping alone may be too costly. May be easier to find a donor car somewhere closer to home, but putting in t-tops is something I'm thinking about doing also.

[texxas8902]

Not to ruin anyones parts sale or dissuade anyone from putting the Hurst hatches in your car but DON'T DO IT. They are with out a doubt the worst part of my 76 442. The cause noticable cowl shake at freeway speeds. Leaked even when they were new and have a sparse part supply. I have wished my car had a solid roof many times. I have been in other t top equipped cars and have owned many different models with tops and my Hurst hatches are by far the worst even though I have worked and tweaked on them to keep them from leaking and rattling. They are probably better than 90 percent of cars with the Hurst hatches but they are far from good. Chopping holes in your roof is a bad idea even if you're Hurst. Taking them on and off can be a hassle and don't drop one. The fresh air is nice when they are removed but a power sunroof or ragtop would be better if you need the wind in your hair. I know those weren't options for our cars and the Hurst hatches were. Plus the tint technology in the 70's was non existant, so they may as well be clear glass as far as the protection from the sun they give you. Just my 2 cents worth...

[ragz442]

I noticed some of those problems with my '76 before I disassembled it. They really didn't do a very good job on the conversion. Now that it's basically a bare shell I was going to try and do a better job of reinforcing the roof panel. At least there wasn't any cracks in the sheetmetal like I've seen on some cars. I do think the car looked sharp with the t-tops removed, something a little different anyway. It is kind of a give and take though.

FWIW, the t-tops on mine did not leak. From what I've heard over the years, I'ts gotta be one of the few that didn't.

[texxas8902]

The fresh air is nice when they are removed but a power sunroof or ragtop would be better if you need the wind in your hair. I know those weren't options for our cars and the Hurst hatches were.

I have seen a 76 Monte Carlo that had a GM factory power sun roof and I have seen a couple of Pontiac Can Ams that had this option also. Has anyone ever seen a Cutlass or 442 with this rare option? This was the sun roof with the metal sliding door, it slid back inside the roof. I know the Vista vent was available at one time too.

[texxas8902]

I At least there wasn't any cracks in the sheetmetal like I've seen on some cars.
FWIW, the t-tops on mine did not leak. From what I've heard over the years, I'ts gotta be one of the few that didn't.

Yeah I've even seen cars(Camaros and Firebirds) with the better designed Fisher tops crack and rip the sheet metal.
Your car must have been the only one that didn't leak. Mine never leaks when driving only if it sits outside in a downpour, then it will collect a little water on the floor mats but only a very small amount.

[ragz442]

When I first looked at it before buying it a couple years ago it was sitting outside during a major downpour. The floorpans, carpet etc. were dry and no signs of water inside anywhere. The only through rust in the pans is the drivers footwell, but that was due to a big hole some bonehead punched in the firewall and didn't seal up [you can follow/see the stain to the pan]. I've never seen a factory power sunroof on a mid year Cutlass except the 73 Vista Vent, and from what I understand they're pretty rare. Not saying there isn't any, I've just never seen one. I feel the same way about sunroofs as you do about t-tops, my 77-442 has one and I wish it didn't.

[texxas8902]

I've never seen a factory power sunroof on a mid year Cutlass except the 73 Vista Vent, and from what I understand they're pretty rare. Not saying there isn't any, I've just never seen one. I feel the same way about sunroofs as you do about t-tops, my 77-442 has one and I wish it didn't.

Yeah I only like the factory power sun roof. Those JC Whitney/ Monkey Wards/Western Auto aftermarket roof holes don't do anything for me. I actually think of them as lowering the value of the car.

[442MUCH]

I'm in need of 77 header assy w/grilles. Do you have any better pics of yours and how much ? (with shipping to Texas)

OK here are the pictures of the header. There are two broken screws still in the header like in the last picture. Never tried to remove as this is a spare in case I need one. Offers?

http://img.photobucket.com/albums/v417/vttedrm/DSC_2976.jpg
http://img.photobucket.com/albums/v417/vttedrm/DSC_2988.jpg
http://img.photobucket.com/albums/v417/vttedrm/DSC_2991.jpg
http://img.photobucket.com/albums/v417/vttedrm/DSC_2981.jpg

[Stocker]

Are the Rallye Pac gauges still available? Price?

[442MUCH]

Are the Rallye Pac gauges still available? Price?

Check your PM

[allpro1975]

What kind of price are you needing for the header? Are there not any grilles or emblems?

[73431Cutlass]

There is a 76 S type with a factory sunroof in it at a local boneyard, always thought about taking it but havent yet. Car was burned fairly well by an arsonest at the boneyard. Been sitting there for a decade or so. I may go look again for sh-ts and giggles.......

[texxas8902]

There is a 76 S type with a factory sunroof in it at a local boneyard, always thought about taking it but havent yet. Car was burned fairly well by an arsonest at the boneyard. Been sitting there for a decade or so. I may go look again for sh-ts and giggles.......

Hey if you do, take some pictures of that rare factory roof, inside and out. That would be cool. Is it a vista vent roof or a factory power roof car?